Efectiveness of the waveone and ProTaper D systems for removing gutta-percha with or without a solvent.

Endodontic retreatment requires complete removal of the filling material and access to the apical foramen. The purpose of this study was to evaluate the effectiveness of the Wave One reciprocating system and compare it to the ProTaper D rotarysystem, with or without the use of a solvent, in removing filling material from root canals. The time required for each filling removal technique employed was also determined and compared. Forty extracted human mandibular premolars with a single, straight, flattened canal were prepared and filled. They were divided into four groups (n = 10): Group 1: ProTaper D Ni Ti rotary instruments; Group 2: ProTaper D Ni Tirotary instruments, with a solvent; Group 3: Wave One primary instrument; and Group 4: Wave One primary instrument, with a solvent. The teeth were then split along their long axis and photographed using an operating microscope with 5Xmagnification. The amount of remaining filling material was assessed with Image Tool software. The results were compared using the Kruskal Wallis test (p <0.05). There was no significant difference between groups regarding the amount of residual filling material (p > 0.05). Operative time was significantly longer in Group 3 than in groups 1, 2 and 4 (p <0.05). The Wave One system and the ProTaper D system were equally effective, with or without a solvent. The time required to remove the filling material from the canals was significantly longer in Group 3 than in the other groups.

No retratamento endodôntico, a completa remoção do material obturador e o acesso ao forame apical são necessários para permitir a limpeza do sistema de canais. O propósito deste estudo foi avaliar a eficácia do sistema reciprocante WaveOne ecomparálaao sistema rotatório ProTaper Universal, com ousem o uso de solvente, na remoção do material obturador. O tempo necessário a cada técnica empregada foi determinado e comparado. Quarenta pré-molares inferiores humanos extraídoscom canal único, reto e achatado foram preparados e obturados. Foram então divididos em quatro grupos (n = 10) de acordo como sistema utilizado, como segue. Grupo 1: ProTaper D Niti; Grupo 2: Sistema ProTaper D com solvente; Grupo 3: Sistema WaveOne instrumento Primary; e Grupo 4: Sistema WaveOne instrumento Primary com solvente, sendo o tempo registrado. Os dentes foram clivados longitudinalmente e fotografados utilizando microscópio operatório com aumento de 5 vezes. A quantidade de material remanescente foi avaliada com o uso do software Image Tool 3.0. Os resultados foram comparados utilizando o teste de Kruskal Wallis(p < 0.05). Em relação aos resultados, não houve diferença significativa entre os gruposquanto à quantidade de material obturador residual (p > 0.05). O tempo operatório no Grupo 3 foi significativa mente maior do que nos grupos 1, 2 e 4 (p < 0.05). O sistema WaveOne foi tão efetivo quanto o ProTaper D, com ou sem solvente. tempo necessário à des obturação dos canais no Grupo 3 (WaveOne sem solvente) foi significativamente maior do que nos demais grupos.

Sealing ability of mineral trioxide aggregate (MTA) combined with distilled water, chlorhexidine, and doxycycline.

The aim of this study was to evaluate the sealing ability of mineral trioxide aggregate (MTA Bio) combined with different mixing agents (distilled water, chlorhexidine, doxycycline), used as an apical root-end filling material. Forty-two extracted human teeth were divided into three groups (n = 12); six teeth were used as controls. Root-ends were resected at 90 degrees, 3 mm from the apex. Root-end cavities were prepared using ultrasonic tips and filled with MTA Bio plus distilled water, 2% chlorhexidine solution, or 10% doxycycline solution. Apical sealing was assessed by microleakage of 50% silver nitrate solution. Roots were longitudinally sectioned in a buccolingual plane and analyzed using an operating microscope (20× magnification). Depth of dye leakage into the dentinal walls was measured in millimeters. Results were analyzed using ANOVA and Tukey's test (P = 0.05). MTA Bio plus distilled water showed significantly higher mean leakage results (1.06 mm) when compared with MTA Bio plus doxycycline (0.61 mm), and higher, although not significant, results when compared with MTA Bio plus chlorhexidine (0.79 mm). In conclusion, replacing distilled water with two biologically active mixing agents (doxycycline and chlorhexidine) did not alter the sealing properties of MTABio. The antimicrobial properties of these combinations should be further investigated.

Assessment of the separation incidence of mtwo files used with preflaring: prospective clinical study.

INTRODUCTION: The Mtwo rotary system was designed to be used at full length without performing previous cervical enlargement or creating a manual glide path. However, to our knowledge, no study has investigated whether preflaring influences instrument fatigue. The purpose of this clinical study was thus to evaluate the incidence of separation of Mtwo instruments during the preparation of mandibular and maxillary molars and bicuspids that was preceded by cervical preflaring. METHODS: A total of 556 treatments were performed by 6 endodontists after calibration. Cervical enlargement and exploration with hand files were undertaken before using the rotary files. The canals were negotiated with small K-type hand files. Cervical and middle thirds were prepared with hand files and Gates-Glidden burs. Irrigation was performed with 2 mL of 2.5% NaOCl after each instrument. The working length was established, and the apical third was prepared with Flexofiles until a #15 file could reach the working length, establishing a glide path. The Mtwo instruments were used following manufacturer's recommendations and disposed of after being used in 5 teeth. Each file was examined under ×8 magnification after use. In cases of file deformation or separation, the entire file kit was no longer used, except when using the 10.04 file. Because of its high failure rate, which is well-established in the related literature, this instrument could be replaced at any time. RESULTS: Separation and deformation rates were 1.98% and 28.78%, respectively. Ten of the total separations observed occurred with the 10.04 file (90.01%) and one with the 15.05 file (9.09%). CONCLUSIONS: The use of Mtwo rotary instruments preceded by cervical preflaring with manual files and Gates-Glidden burs provides a low separation incidence.

Influence of different manufacturing methods on the cyclic fatigue of rotary nickel-titanium endodontic instruments.

INTRODUCTION: The aim of this study was to evaluate, by static and dynamic cyclic fatigue tests, the number of cycles to fracture (NCF) 2 types of rotary NiTi instruments: Twisted File (SybronEndo, Orange, CA), which is manufactured by a proprietary twisting process, and RaCe files (FKG Dentaire, La Chaux-de-Fonds, Switzerland), which are manufactured by grinding. METHODS: Twenty Twisted Files (TFs) and 20 RaCe files #25/.006 taper instruments were allowed to rotate freely in an artificial curved canal at 310 rpm in a static or a dynamic model until fracture occurred. RESULTS: Measurements of the fractured fragments showed that fracture occurred at the point of maximum flexure in the midpoint of the curved segment. The NCF was significantly lower for RaCe instruments compared with TFs. The NCF was also lower for instruments subjected to the static test compared with the dynamic model in both groups. Scanning electron microscopic analysis revealed ductile morphologic characteristics on the fractured surfaces of all instruments and no plastic deformation in their helical shafts. CONCLUSIONS: Rotary NiTi endodontic instruments manufactured by twisting present greater resistance to cyclic fatigue compared with instruments manufactured by grinding. The fracture mode observed in all instruments was of the ductile type.

Single-session use of mineral trioxide aggregate as an apical barrier in a case of external root resorption.

External root resorption may occur as a consequence of trauma, orthodontic treatment, bacterial infection or incomplete sealing of the root canal system (bacterial re-infection), and lead to crater formation on the resorbed apex. This would deform the root apex surface, and cause loss of apical constriction. Depending on the extent of the resorptive process, different treatment regimens have been proposed. A 34-year-old male patient presented with an intra-radicular retainer and an inadequate filling on tooth #21, as well as a radiographic image suggesting periapical bone rarefaction. After root canal retreatment, the defect was accessed coronally. The resorption area was chemo-mechanically debrided and since the apical end was very wide, a calcium sulphate matrix was made. Mineral trioxide aggregate (MTA) was used to fill the resorptive defect, and the coronal access was temporarily sealed. After 24 h, the quality of the apical seal was evaluated with the aid of an operating microscope, and then the root canal system was filled. A 12-month follow-up radiograph showed adequate repair of the resorption. Clinically, the tooth was asymptomatic. We concluded that MTA can be successfully used to avoid overextension of the filling material when treating a tooth with external resorption.